

P.E.I. rating measures Tile design durability from 1-5:
The Dynamic Coefficient of Friction is a rating of the slip resistance of a floor. It is a measurement of how much friction there is on a floor when walked upon. The higher the number, the more slip resistant.
>=.42Though absorption rate may vary, product rated greater than 0.5% is not recommended for outdoor installation, but can be used indoors. All tile is recommended for interior use.
Less than 0.50 percentMost manufacturers use the MOHS scale to test the scratch and abrasion resistance of the glaze applied to tile. The MOHS scale is based on a relative value of 1-10; with 1 being the softest and 10 being the hardest. The following are the ten standard minerals used in the scale. 1. Talc, 2. Gypsum, 3. Calcite, 4. Fluorite, 5. Apatite, 6. Orthoclase, 7. Quartz, 8. Topaz, 9. Corundum, 10. Diamond.
8Edge-style affects both appearance & ease of installation like:
Waterproof and water-resistant designations refer to the product’s ability to withstand moisture and spills. Waterproof or water-resistant tile is suitable for all rooms in the house including kitchens, basements, and bathrooms. Some tile requires sealing during the installation process in order to withstand exposure to water. All tile must be installed properly for these conditions to be met.
WaterproofTile's ability to withstand freeze-thaw cycles when directly exposed to the elements.
Frost ResistantPrint quality on Tile varies from:
50% more slip resistant tiles give a result of 0.63 or greater for the Dynamic Coefficient of Friction (DCOF) test. The most common industry reference for the DCOF test is to 0.42 as the ANSI standard for use on wet surfaces. This tile has a DCOF 50% greater than this standard.
YesDirect from the four corners of the globe to bring better products & prices to you.
USAThe recommended grout line thickness for best results in a tile installation.
1/8, 3/16, 3/8, or 1/4The surface for which the product can be installed upon. The surface should be clean, stable, and meet installation and warranty guidelines prior to installation.
Floor/WallAble to be submersed in water and suitable for both saltwater and chlorine pools
Pool InteriorsThis product may be used on the surface surrounding a pool or other wet area.
Pool DecksThis states whether a product is compatible for use with radiant heat kits. See installation instructions and warranty for more details.
YesLight Residential: Suitable for wall applications or areas with light foot traffic such as powder rooms or guest rooms.
• Comparable to PEI 1 & 2
All Residential / Light Commercial: Suitable for use in regularly trafficked residential areas such as kitchens, hallways, bedrooms, and laundry rooms. Light commercial areas with limited traffic, such as offices and retail shops, are acceptable.
• Comparable to PEI 3
All Residential / All Commercial: Suitable for use in heavily trafficked residential and commercial areas, such as foyers, living rooms, lobbies, hospitals, and airports.
• Comparable to PEI 4 & 5
All Residential/ All CommercialLiven up any room with the Summit Sand II Porcelain Tile. This 12 x 24 tile features a matte finish. Durable stone-look tile is an affordable alternative to natural stone, and it looks great throughout the house. Plus, you can get the authentic look of stone with an easy-to-maintain surface, as stone-look tile is waterproof and doesn’t require sealing.
This tile was made in the United States.